Home/Machines/Automatic Turntable
Automatic Turntable Wrappers

Automatic Turntable Stretch Wrappers in Houston

The step up from semi-automatic: the machine attaches and cuts the film for you, so the operator only stages pallets. Built for busier operations with stable loads, at the best price in the market.

What is an automatic turntable stretch wrapper?

It's a turntable wrapper that attaches and cuts the film automatically. Unlike a semi-automatic, where the operator threads the film tail and cuts it on every load, the automatic model clamps, wraps, then cuts and wipes the tail on its own, so the operator only stages pallets on and off. That hands-off cycle is what lets it keep pace at higher volume, wrapping roughly 30 to 60 stable pallets a day.

Orion Flex automatic turntable stretch wrap machine

How it works

  1. Stage the pallet on the turntable with a forklift or pallet jack.
  2. Press start. The machine automatically clamps and attaches the film, no threading by hand.
  3. It wraps the load bottom-to-top and back down, with reinforced base wraps, while powered pre-stretch stretches the film.
  4. It cuts and wipes the film tail automatically at the end of the cycle, the operator just removes the wrapped pallet and stages the next one.

Removing the manual attach-and-cut step from every load is the whole point: it cuts the seconds the operator spends per pallet, keeps wrap tension and coverage consistent load after load, and lets one person feed the machine steadily through a busy shift.

Best for

  • Busier operations that have outgrown a semi-automatic's pace
  • Wrapping ~30–60 stable pallets a day
  • Teams that want consistent, hands-off wrapping without a full conveyor system
  • Standard, stable loads that are fine to rotate on a turntable

Not the best fit when…

At a glance

Load typeStandard, stable pallets
Typical volume~30–60 pallets/day
Film attach & cutAutomatic (operator only stages pallets)
OperatorLoads & unloads the turntable
Pre-stretchPowered (film savings per pallet)
Typical price~$12,000–$30,000 (new; varies by options)
Brand we supplyOrion (Flex)

Brand we supply

We carry the field-proven Orion Flex automatic turntable wrapper, a dependable, higher-throughput machine with automatic film attach, cut, and wipe. We'll match the turntable capacity and options to your loads and volume and quote you the best price in the market, with stretch film from the same local source.

Answers

Automatic Turntable Wrapper FAQs

What's the difference between a semi-automatic and an automatic turntable?
On a semi-automatic, the operator attaches the film tail at the start of each load and cuts it at the end. An automatic turntable does both for you, it attaches and clamps the film, wraps, then cuts and wipes the tail automatically, so the operator only stages pallets. That hands-off cycle is what lets it keep up at higher volume.
How many pallets a day can it handle?
Roughly 30 to 60 per day, depending on load height, turntable speed, and how fast you can stage pallets. Because the operator no longer attaches and cuts film on every load, throughput jumps well past a semi-automatic while the cost stays below a fully automatic inline system.
How much does an automatic turntable stretch wrapper cost?
More than a semi-automatic, because of the automatic film clamp, cut, and wipe hardware, but far less than a fully automatic inline system. Pricing depends on the model, turntable capacity, and options. We quote the best price in the market, request a free same-day quote.
Do you sell the stretch film for it too?
Yes. We supply machine-grade stretch film refills in the gauges and roll sizes your automatic wrapper needs, delivered across Houston, one local source for the machine and the film.

Get the best price on an automatic turntable wrapper

Tell us your loads and volume, we'll confirm it's the right step up and quote you the best price in the market, with film to match.

Get a Free Quote →